Andy

same problem here on Windows 10 x64... cant pull up the menu from the taskbar...

hmm I also have the AMB8665-M but can't get it running. `wmbusmeters --debug /dev/ttyUSB0:c1,t1` ``` (wmbusmeters) version: 1.8.0-7-g78990c4 (config) using device: /dev/ttyUSB0:c1,t1 (config) number of meters: 0 (lookup) with file/hex...

thx but still: ``` (wmbusmeters) version: 1.8.0-7-g78990c4 (config) using device: /dev/ttyUSB0:amb8465:c1,t1 (config) number of meters: 0 (serial) tty /dev/ttyUSB0 can be accessed (serialtty) opened /dev/ttyUSB0 fd 3 (detect amb8465) (amb8465)...

``` (wmbusmeters) version: 1.8.0-7-g78990c4 (config) using device: /dev/ttyUSB0:amb8465:c1,t1 (config) number of meters: 0 (lookup) with file/hex "/dev/ttyUSB0" amb8465 (serial) check if /dev/ttyUSB0 can be accessed (serial) tty /dev/ttyUSB0 can be...

ok I will try using another baudrate. Is this correct: `wmbusmeters --debug /dev/ttyUSB0:115200:c1`

I have the same problem. It shows no videos at all in the My Supscription menu. This is a small part of the log file: ``` 2022-05-28 22:44:51.899 T:29669 ERROR...

hmm that does not work for me. It does at least ask for all the data but the lines between each device do not get populated...

the new "2018-11-20_2018-11-13-fullpageos-stretch-lite-0.10.0" nightly version does not work. During the first boot after flashing the SD-Card the boot sequence gets displayed on the 7" RPI screen. But after the boot...

aha hmm I did deactivate the GPU with the `sudo raspi-config` and now it works! Or is this wrong???