Félix Boisselier
Félix Boisselier
This was merged today :)
Looking at this with a fresh eye, there are two points to consider: - There is already the filter fan function, and this can work very similarly to a bed_fan...
This is not a bug but "normal": - The goal of status leds is for some devices to show the printer status with colors. Usually on a Voron printer, it's...
Yes this is a known issue but the thing is that it changed more than two years ago from now and there is almost no one still runnning the old...
Yes, this is some work that I wanted to do indeed. But it's a lot of work ^^ I'll try to do it somedays but if someone wants to do...
There is already this markdown documentation: https://github.com/Frix-x/klippain/blob/main/docs/pinout.md I think this could be easily extended with links to each board doc with something more detailed, containing the infos you want to...
I'll do a couple of minor changes to change some wording in the documentation and also add warning that
@Benoitone are the changes ok for you? Especially the startup change as I changed a bit the "if" logic to add the deprecation warning and not sure it's ok like...
Hello @Benoitone , I'm coming back to the project and will work on merging this branch when you are ready :) Is there anything that needs to be updated before...
That's very strange! Can you confirm that if you do `BED_MESH_CLEAR` and then `BED_MESH_CALIBRATE` there is indeed a mesh loaded? This should be the standard behavior of Klipper. If it's...