Félix Boisselier

In my case, the board was sold without any bootloader or firmware pre-flashed in factory: the board was not recongnized by my computer (nothing happened when plugged by USB) and...

Hi, I asked something quite similar on the issue https://github.com/UnchartedBull/OctoDash/issues/676#issuecomment-714340653. Maybe the best compromise would be to add all the currently loaded filament information in the main "Filament" screen of...

Hi, I'm back with some mockups that I've done very quickly today. So, two pictures: 1. The first one is a rework of the main screen during a print. As...

Thank you, feel free to add them as you want in Octodash :) I'll be available to discuss and test it when you'll be ready !

It would be cool to also have an option in the Firmware menu to only Flash or SD flash without rebuilding for when you have multiple same MCU (like two...

Thanks for the PR. This looks pretty good for me. I just need to think a little bit at what could happens if the moonraker instance is in another computer....

Ok, so I added another warning for now in the install script: 2514b894b7f881bc60c6d5c3d777ac37cab57811 I'm going to put this PR on hold and see how we can merge this in a...

Thanks for putting your request here. It will be easier for us to track them and add them in a futur release :)

Hello, Thank you very much for this PR. This is a change on a very important part of the config, so I will definitely try it and check everything before...

> @austinrdennis Seems we get the solution soon in klipper: [Klipper3d/klipper#6262](https://github.com/Klipper3d/klipper/pull/6262) It's indeed something that would fix this problem very easily! So I'll keep this PR open in the meantime...