Freihut

Mentioned this (or a very similar) issue also here and included example-svgs to trigger or not trigger this: https://github.com/bgrabitmap/bgracontrols/issues/130#issuecomment-1717680690

Hellu, I'm not sure I ran into the same issue, but I also got a access violation caused by stretchDraw (happens at Free()). For some reason this needs to be...

@lainz Try to create a new project, drop a TButton and a Timage and copy that procedure `TForm1.Button1Click(Sender: Tobject);` from my unit1.pas and you should be good to go (don't...

@circular17 Here you go: [gdb_backtrace.txt](https://github.com/bgrabitmap/bgracontrols/files/13068762/gdb_backtrace.txt) (Its from a gtk2-build)

> Are you sure it is an access violation? Good question! I double-checked and modified the example (to dump the exceptions), and it turned out: Sometimes you'll get an EListError...

Glad to help, but I'm afraid, this doesn't fix it: First button click usually runs without exception now, but on 2nd I got ElistError/EaccessViolation, than the example-app just disappears (without...

Hellu circular17, with latest fixes, a loop of 10000 clicks can't reproduce the bug anymore. Great job!

> It did perform the function of finishing the current encode and stopping. You're right, I tested again (two times with the stop-button in the main window and the one...

rpm-readings vs percent-readings, isn't my point (I'm aware of that). (1881/5558)×100=33%, msi_ec shows 43(%). (3900/5558)×100=70%, msi_ec shows broken stuff ('invalid argument') "turbine mode"=fans@maximum, done by FN+Arrow up

Yes, it is the same thing. 5558 = the maximum cpu-fan-rpm (on "turbine mode") for my device, so 100% 1881 = idle, 3900 = cpu-rpm at maximum cpu-load. The rpm...