Frederic BOLTZ
Frederic BOLTZ
Thank you for report. In fact it's hard to determine if values are wrong or not😀
> this si my problem with this module: > > dram voltage not reading fine > > nct6687-isa-0a20 > > Adapter: ISA adapter > > +12V: 12.19 V (min =...
Did you blacklisted nct6683 module ?
Yes because the nct6683 is concurrent of nct6687 and probably the nct6683 is installed inplace of mine. Values coming from nct6683 are lazy.
As is, the module sample values in the nct6687 register every 100ms nothing else. So i don't know where come the erroneous values. Did you fill something in /etc/sensors3.conf or...
Hello, Have you the ability to run W10 and install Hardware monitor using LibreHardwareMonitor and check the concerned voltage. Regards
Thank you
Well I have also no linux machine 10850K with an MSI B460M Bazooka having NCT6687D and under linux I have the error. I can invest now to find the problem
Hello thank you for your effort, I find finally the problem. In fact between AMD motherboard and Intel motherboard the sensor are not connected with the same register. So the...
@opal06 Try my sensors conf in sensors.d, I think that it work correctly for you mobo.