Frederic BOLTZ
Frederic BOLTZ
` +12V: 145.73 V (min = +145.73 V, max = +146.30 V) +5V: 24.90 V (min = +24.85 V, max = +25.00 V) ` Input register look like good just...
Hello, by reading label in sensors output it look like that the module used to report voltage & fan speed is not mine also the label "in1" used in the...
The main difference is the nct6683 is not the same chipset as nct6687, and command line sensor with the nct6683 module report wrong value for temp and voltage. I have...
As you can see, voltage are not correct, values & labels And in you report something goes wrong: ``` system fan1 (rear): 0 RPM (min = 0 RPM, max =...
Hello, could you verify the voltage in the bios?
Hello, yes each time the kernel is updated you need to rebuild the module because the module is located in directory ls /lib/modules/
> Ah ok, good to know. Anything on the 5V showing 6,9V? It's hard for me to reply because i don't have this motherboard and secondly you don't see this...
Normal inxi use sensors to collect infos. Well I have no idea. Except mesure the voltage on your PSU. regards
Hi all, thank you for contribution. Is the patch remove the detection inside nct6683.c? Regards
Hello, many thanks for your report. For fan control, I'm surprised and it's amazing. Probably I did a mistake during my test phase. Please could you share your fan control...