Grant
Switches need to be configured. This can be done by connecting them via USB Serial to the OOB device @ AMS. After https://github.com/openstreetmap/operations/issues/656 completed
The Raspberry PI OOB1 at Dublin currently only uses a single power feed. Install: 1x 5V USB-C Dual Supply - Dual Ideal Diodes 2x Raspberry PI USB-C power supply 1x...
``` /dev/sda: (Smart Array P410i) RAID 6 Volume 0 status: Using interim recovery mode. Failed drives: connector 1I box 1 bay 2 HP EG0146FAWHU 6SD35JSS0000B141KALJ HPDG ```
We now have a pagerduty account. We should configure alertmanger to send alerts to pagerduty.
The APC PDU 1 and 2 should be linked by a sufficiently long ethernet cable. Terminators are already installed.
The 2x Juniper EX4300 are at AMS. The Switches should be racked.
Grisu RAID controller battery is end-of-life. ``` /dev/sda: (Smart Array P410) RAID 6 Volume 0 status: OK. /dev/sg1: (Smart Array P410) Enclosure DL18xG6BP (S/N: ) on Bus 0, Physical Port...
Recently a server's BIOS settings were reset, causing Date/Time to be incorrect. DNSSEC failed due to incorrect time. The NTP servers in chrony could then not be resolved due to...
tabaluga's Smart Storage Battery appears to have failed and should be replaced. HPE Part Number: P01366-B21