F1ATB

I agree that with a touchpad, it is not easy to change the frequency. Nevertheless, there is an alternative with the left and right arrow of the keyboard.

You can also construct a rotary knob as described here: [https://f1atb.fr/index.php/2021/12/06/rotary-knob-and-morse-manipulator-for-remote-sdr/](https://f1atb.fr/index.php/2021/12/06/rotary-knob-and-morse-manipulator-for-remote-sdr/)

In version 5.07, I have intoduced new features to change the frequency. Go on "Tools" page and click on "Look for updates". 73 F1ATB

First you have to go on the Settings page. Just below the top, set the Access Key to 1234 Then you go on the Tools page and on the line...

Christen Deactivate in chrome " allow-insecure-localhost " In version 5, i have put an https access with a self-signed certificate. You don't need to put an exception as in version...

you need to enter the access key '1234' in the top of the setting page. Regards 73 F1ATB Le sam. 3 sept. 2022 à 12:15, Christen Fihl ***@***.***> a écrit...

- Deactivate in chrome " allow-insecure-localhost ". This was for version 4 and not needed for version 5 of Remote SDR. - in the Tools page, click on - Reset...

You must accept the certificate. It's a self-certified certificate create by me. It's free. You accept validate as explained here https://f1atb.fr/index.php/2022/05/21/remote-sdr-v5-raspberry-4b-or-orange-pi-image-installation/ and you will switch to https which is mandatory...

In the Short Term no. First, I have to check the feasibility to connect the Airspy HF to GNU Radio 3.8.

I answered this morning. https://f1atb.fr/index.php/2022/01/18/omnirig-remote-sdr-2/ Le lun. 17 oct. 2022 à 09:26, AndyBlm ***@***.***> a écrit : > Hi Andre! > I leave a message on you site but today...