F1ATB

Andy Which software (YONIQ-SSTV, WSJT-X...) is connected to Omnirig? It must provides the frequency. André ***@***.*** Le lun. 17 oct. 2022 à 14:14, AndyBlm ***@***.***> a écrit : > Andre,...

You need to transmit continuously the frequency. Otherwise, there is a timeout and you are disconnected. André Le lun. 17 oct. 2022 à 15:49, AndyBlm ***@***.***> a écrit : >...

Base system use Debian. Le lun. 14 nov. 2022, 04:27, d9394 ***@***.***> a écrit : > the base system using debian or alpine? > > — > Reply to this...

May be this winter. Lack of time. Regards Le mar. 17 oct. 2023 à 11:21, Sergey R5AU ***@***.***> a écrit : > Hi André ! > I hope you well...

For the moment I work on RTLSDR or RSP1A and FT991 TX Le lun. 12 déc. 2022 à 17:43, Daniel SP0DZ ***@***.***> a écrit : > maybe it is easy...

Orange Pi 3 LTS is a nice board which should work with Remote SDR. Sorry, there is no image available. You should do it by following the manual installation procedure....

I have to investigate the feasibility as it takes time to set the parameters of the transmitter when you want to transmit. For the moment, I put the transmit gain...

Honestly, I don't know. I have not yet used an Orange Pi 4 LTS Le lun. 12 déc. 2022 à 19:16, Daniel SP0DZ ***@***.***> a écrit : > I have...

RPI3 is too weak. OPIZ2, may be an issue with the SD card. Currently Remote SDR version 5 image is running correctly on OPIZ2. I have good return I have...

I have ordered one and when received will integrate it in Remote SDR. Le ven. 3 févr. 2023 à 08:41, razvanfatu ***@***.***> a écrit : > Will support for CaribouLite...