Dominik

@RedworkDE Just tried the PR and it seems like it does indeed resolve the issue. I get this error now after every change in the C# project but it doesn't...

On Steam Deck I was able to just download the game and run it now, didn't have to switch to desktop mode or switch Proton versions at all. On desktop...

Not sure if it's the exactly same issue but I'm also getting flickering on my 6900 XT running through gamescope with HDR enabled. Will try later without gamescope and HDR...

If your packet starts with `68 FA FA 68` it may be supported but it's unlikely since every provider has to do their own thing.

If you already have an ESP with ESPHome connected you can just set the logger component to VERBOSE and you should see incoming data on your UART port.

Can you define what you mean with "idle state"? Can you give an example of what you're trying to accomplish?

The AC does not report what it is actively doing from what I can tell, only what mode it is in. So there is no way to know if the...

You can check the protocol description in the folder [here](https://github.com/DomiStyle/esphome-panasonic-ac/tree/master/protocol). There's plenty of unknown fields that could hold the current action. I might be able to take a look another...

Dein Paket is zu kurz, schau dir mal die anderen Issues dazu an: https://github.com/DomiStyle/esphome-dlms-meter/issues/2 https://github.com/DomiStyle/esphome-dlms-meter/issues/3

You can enable verbose logging and toggle econavi back and forth via the remote. You should see something changing in the polling response the ESP gets. The currently known fields...