Alain Turbide
Alain Turbide
The service is designed to be run from homeassistant. Not from the yaml
But, having said that, I never needed to do it so I messed around and found a solution for it. It normally involves a complex constructor but I've added a...
The green line is already at level zero at rest and gets pulled to 12 volts when active . I don't get why you think there would be short if...
Wow, that' s quite a circuit. I don't see why the need for a greenout enable line though? As to cleaning up the signal, I also have not seen this...
Yes, the panel already has a measured passive 1kohm resistance to ground so adding another 1kohm in parallel (as in the emitter of the optocoupler) is not necessary or recommended...
If you don't mind, I'd rather not add this type of change to the code at thist time as your circuit is not something that i see being used by...
I will definitively add a full opto-isolation example schematic as an alternative option for users as i agree that is the better approach. I will let the users choose the...
> I'm happy to prepare an isolation schematic and submit it as PR w/o the logic chips.. probably next weekend, once I build and test it. -A > […](#) >...
Sure, go ahead.
I experimented with various optocouplers and found the initial recommendaton of 4n25/4n26 totally inadequate for this application. The CTR is way too low. I tried a couple others I had...