Alain Turbide
Alain Turbide
The trouble binary sensor only activates currently for ac and battery issues at this time. For zone statuses, you will see the zone sensor be on for the zone and...
Are you currently seeing the ck:15 and ck:16 in the zone status field on home assistant? You should be. You should also be seeing the fault sensor being shown on...
Change the "return vista.keybusConnected" in your yaml line to: ``` return $panelId->connected(); ``` As to the armed away flag issue, I'll have to see if it happens on my system....
I have no idea why you are getting that error. There is something messed up with your build environment somewhere. You might want to check that you are compiling the...
Arghhhh. You are doing it right... My fault. I just checked and found that I had not pushed an old fix to git so the errored version was still there....
What panel do you have? I don't have the same hardware available so never tested issues with CO sensors. I see the issue as to why the armed sensors are...
Must be a later revision than mine. I have an old ADT branded panel version. Your panel behaviour is slightly different then mine and others i've seen in how it...
Can you provide a log sample of open/faulted zones as well. I need to see what flags it sends for those. Tks!
I've pushed a newer version that add ssupport for your panel. It should automatically detect the flag type and adjust accordingly.
Cool. Tks for the offer! I just updated one setting from zone fault capture that should address an issue I found with your version.