Alain Turbide

Sounds like your panel is using PGM outputs for those devices. PGM devices and be activated by sending the cmds "*7x" where x is 1 to 4 (or up to...

Here is an example of a button in ESPHOME that sends a cmd to activate PGM1 on partition 1. You can send any keypad cmd. ``` button: - platform: template...

make sure it's in /config/www. The www directory goes in same directory where your homeassistant config files are. Also whenever you update the js file make sure you update the...

What did you call your esphome instance? The default in the yaml is "dscalarm" but if you called it something else, you will need to modify the service name to...

Sometimes the esp component needs to be refreshed from the ESPHOME integration in settings/devices and services. What you can do is capture the esphome device log while you use your...

What DSC model do you have? You might need to go into program sections 009-010 to see how your relay are programmed. I assume you have the installer code for...

Tks for the pics but more importantly I do need to see esphome logs of the activity from your panel when you send the gate open command using the remote....

As to your gate motor. You indicate that it is connected to the z4 input of the 5108. Since thats' a zone expander, that is an input so I suspect...

Ok, I'm re-reading one of your comments. This one ``` t appears to be wired into the panel directly. The same remote triggers the gate. There is a relay connected...

Ok, perhaps I'm making the wrong assumption. I'm assuming that you are using a DSC keyfob with a DSC RF5132 module which talks to the panel and can be seen...