Alain Turbide
Alain Turbide
Yes, they would report the close events immediately as the communications between the expanders and the panel are captured and processed.
You have to realize that the usual door switches are connected directly to the panel and not to the bus. The panel will detect the closure immediately because of that...
You'll need to be more specific here as to what keypads you have. With 6160 keypads, all you see are the fault/alarm messages. You do not see closure messages. The...
I re-read your message. The ready light turning on/off with the zone action is a different message altogether. When an open zone is closed, and if there are no other...
ah.. ok, I misunderstood what you were saying. Yes, I had mean to implement the reset of open zones when the ready flag is active but forgot about it since...
Actually, if you can, can you post esphome logs of the traffic you get when a zone is opened or closed? You would need to be using the dev branch...
Thank you ! It looks like you are missing the module data side of it. Do you have the monitor line hooked up on your circuit? This is the "monitorpin"...
Awesome tks! Can I ask you another favor? I see that my f6 cmd log size is too small. I've updated the code to fully display the cmd so that...
Tks again! Well, from what I see, there are no queries for specific zone statuses. All I see are periodic system status queries. I guess the 6270's don't get zone...
Are you saying for example that you have two zones open and one closes, you get instant notification that this zone is closed? If there is only one zone open...