Dietz0r

> From NIST RS274NGC v3 paragraph 3.6.3: > > "The coordinate axes will be stopped in the same absolute position they were in before the tool change (but the spindle...

Would it be possible to set a manual TLR? When we could set it at a known location that would basically provide a workaround route for just setting $TLR after...

> To complicate this the [Fanuc dialect is different](https://www.helmancnc.com/fanuc-g73-high-speed-peck-drilling-cycle-chip-break-drilling-cycle/) and returns to the previous Z if G98 is active. Others I have checked after a quick search either do not...

Just got it confirmed by a LinuxCNC user. g98 is followed. So it retracts to previous Z on LinuxCNC