G98 G73 Z retract during XY movement

[norrback]

g98 is a command that tells the cycle to go to the previous z-plane (if it is higher than then R retract plane) ... the counterpart would be g99 which only retracts to the R - plane. now since we can clearly see (from the gcode and video provided) that the drill cycle finishes at z-2 and not at z5 where it should, but it moves up to z5 during the XY reposition, so it clearly knows it's supposed to be up there.

G0 X-119 Y-182.5 Z15 Z5 G98 G73 X-119 Y-182.5 Z-16 R-2 Q0.5 F400 X-19 Y-32.5 X-119

Could not add video here.