DavidRTucker
DavidRTucker
The hx711 outputs a value corresponding to the ratio of difference voltage divided by the voltage applied to the load cell. This ratio is factored by the gain. Full scale...
4000 is 0.047 % of full scale. So don't worry about it. Take an average over more readings if you want a steady value. I suspect that this is normal.
I found that was a factor of 2 out. The gain of my setup is 8573 /kgf. Does anyone know what's this is. I will let you know if I...
The load cell I have has a sensitivity of 1.966 mV/V at 50kg. This is then amplified to 0.2555 V/V. This is then 0.511 of the Hx711 half scale output...
The first thing I notice is that you should have four wires from each load cell. You should start by reading each load cell separately. As I explained earlier in...
You appear to have an apostrophe at the beginning of your #include statement. I guess that this is not in the code. I see you are using A1 and A2....
Okay. The two sensors are actually two half bridges that need to be measured as a pair.
How many mV per V are they supposed give at 50 KG?
Did you have any certificate with the cells?