GrayPillow

icon indicating a website link https://hackaday.io/project/20980-ananasstepper-20-30 icon indicating an email [email protected]

icon company @AnanasRobot icon location Shen zhen icon location A Mechatronics Engineer,good at pragramming with Python Java and C/C++,intrested in Robot Technology , AI and AIot;

Results 7 comments of GrayPillow

Using pyserial to read real time data from sensor cause 100% CPU usage

@leomikezee I think the problem is because the pyserial is working with polling mode. It doesn't like java or c with event trigger mechanism.

Problem about endstop setting for A B or C axis

Sorry for apply so late. I am not working on this problem , I think I should read all the code to solve this problem.

[feature] Add external encoder feedback

Hi, Iromor, I think a CAN bus or I2C bus encoder module is actually needed for this function

Is there a plan to add more kinematics transformation to fit more different machine?

Thanks for your reply,hzeller! I haven't read the PRU part of beagleG. So I should work hard on it,later. Actully I am focusing on LinuxCNC and Redeem (two CNC system...

SLCAN specification mismatch/collision

Oh,it is a sad news.What is the all about the slcan protocol?

Is there some test data About this fw？

I made some CANtact, and test the most performance at the highest baudrate. The most frames sended per second is about 4000 and the most frames received per second is...

Is there some test data About this fw？

I do some test on windows. It seems that the driver not receive all the data send to PC ,then allmost all message lost. I test on 1M CAN bus...