DaneEvans
DaneEvans
That might explain the confusion, though that datasheet is an abomination. The pin 1 index is visible on the diagram of the LED, yet that pin is labelled pin 3....
No it's not On Thu, 13 Oct 2022, 8:47 am Agustin Marquez, ***@***.***> wrote: > this is the same as #166 > > — > Reply to this email directly,...
All good. I figured it was something of the sort On Fri, 14 Oct 2022, 2:10 am Agustin Marquez, ***@***.***> wrote: > No it's not > … > On Thu,...
I don't even have any on hand. I'll check the diffs, but provided you only rearranged things, provided qmk is happy building it, it'll be fine. On Fri, 11 Nov...
Still present on both v1 (all) and v2 (the trrs one)
There should be no need to update the schematic, and it will only give more places for things to go wrong. Just create a new footprint, allocate it to the...
The reason for two completely different footprints is that the underglow one is a SMD footprint, it has no cutout, so the pads have to go under the LED to...
@tiadobatima Definitely don't do any more just yet. At most it's going to be a footprint replacement, at minimum it'll be a drop in replacement - I compared the two...
~~Ahh, you're trusting cheap chinese knockoff data sheets~~ - I agree with you on the surface. But there are at least 3 different SK6812 pinouts/pin 1 locations, so my faith...
Hey @tiadobatima, I've made you a board to start on on my repo (https://github.com/DaneEvans/SofleKeyboard/tree/mini-e) I've made the footprint, placed it on the board, locked the switches and stripped back the...