ChaosBlades
ChaosBlades
The way the Mains Inlet and Switch are depicted on page 210 of the manual would make the printer power on by flipping the switch down instead of up. Also...
This was fixed on the Afterburner CAD but not the Voron-2 CAD that contains Afterburner. STLs need to be updated as well. https://github.com/VoronDesign/Voron-Afterburner/issues/15 In addition, the Probe Brackets are 4.8mm...
Building a Voron v0.0 and was extruding way to much extra filament to be a simple rotation_distance inaccuracy. Turns out I had the wrong gear ratio in the config. (50:10...
The Switchwire manual shows the diode and signal wire connection but just shows the positive and negative probe wires going to nothing.  The website could be...
**Describe the solution you'd like** Fluent starts silently in the background upon user login and fetches new articles based on 'Automatic fetch interval'. When a new article is download it...
### Short description of the app Plex Meta Manager is an open source Python 3 project that has been designed to ease the creation and maintenance of metadata, collections, and...
### Short description of the app Mainsail makes Klipper (3D Printer Firmware) more accessible by adding a lightweight, responsive web user interface, centred around an intuitive and consistent design philosophy....
Some GUI touch elements and text are smaller than others. I suggest doing a pass on all the UI to make sure all the touch elements / text are roughly...
[Pi4] Video is Static during boot only, when booting from HDMI 2 only, at 1080x1920 (NOT 1920x1080)
**Describe the bug** When booting the Pi 4 only on the HDMI 2 port connected to a 1080x1920 monitor (NOT 1920x1080) the entire boot process is scrambled like static on...
### Short description of the app > MusicBrainz used to be listed on a legacy TrueCharts list as an in progress Add but it appears the legacy lists have been...