Bogeyof

Answer-Text is corrected in v3.0, may be also in v2.2. Both are a problem for me, cause JSON-Output is different and I think it´s a bit messed up...

I will try it and report later... I'm using 2.0a for now

I tried Firmware v3.0, still the same behavior, second param would not be set. Can´t use Firmware v3.0, cause JSON-Output is messed up. Many Params are doubled, for example TOP12...

Thanks, tried v3.0 again and JSON is good, my reading routine is working again. Setting of 2 Params still not working for me, second param is never set. I´m using...

Sorry, for me on the console tab there is nothing, only a black area. Tried to enable hexdump log or MQTT log, but always only black area. MQTT log isn´t...

Tested a minute ago with Chrome, Edge and Firefox, black area, no data...

Heishamon hangs in the basement, another WLAN is active there and routed via a port so that I can access the web interface. Possibly the problem is to be found...

I`m routing Port 80 (to 9021). I try in basement in other WLAN now...

OK, in basement with my Smartphone, I get messages on console tab: Tue Jul 12 17:13:46 2022 (71266): New webserver client: 192.168.16.113:44418 Tue Jul 12 17:13:46 2022 (71274): set DHW...

This time no param was changed: Tue Jul 12 17:39:20 2022 (977090): Closing webserver client: 192.168.77.20:62884 Tue Jul 12 17:39:41 2022 (998083): New webserver client: 192.168.16.113:45424 Tue Jul 12 17:39:41...