BibyThm

 We have checked with the above command and still obtaining the same error (refer figure). Is there anything else to be done? @mathias-arm @flit @symeonmattes

 **pyocd: error: unrecognized arguments: --connect-mode=under-reset** We got this error when we tried the above command. Any suggestions? @mathias-arm @flit

It's the advanced version of #797. It supports multiple protocols and is used for forensic analysis. On Fri, Aug 6, 2021 at 5:26 PM Mathias Brossard ***@***.***> wrote: > Does...

https://github.com/ARMmbed/DAPLink/issues/894 We are planning to add a new HIC and not a new board. So, should we make the changes mentioned in the above issue? Does it require a Board...

We want to program, debug and extract firmware from a custom target device. The CPU core and memory organization specifics we want to configure via pyocd. What is the best...

We have done as per the suggestions, but the same issue persists. Any other suggestions? @mathias-arm @flit

> Now you should be able to point to this `foo` project directory with the `-j`, `--project`, or `--dir` flags of the `PYOCD_PROJECT_DIR` environment variable. How do we point to...

Any suggestions to the above problem? @mathias-arm @flit

 This is how we have given the command. The screenshot of the error obtained is attached. Kindly look into this and advice us what needs to be done. @mathias-arm...

 Now we are obtaining new error. Any suggestions? @mathias-arm @flit