BerzerkaDurk

toolhead PCBs - possibly rotate JST connectors for PCF and HEF?

1

When I built my Trident, I cut my fan wires to the right length and put new JST connectors in the original fan's connector orientation. Turns out, that puts the...

Specification and installation of the 2 M3 hex nuts on the carriage halves, corresponding to the M3x40 and M3x30 S.H.C.S.'s are missing. I would assume that, for ease of installation,...

[Manual] With the popularity of CANbus mods, it could be helpful to document alternate endstop mounting.

1

I know that CANbus is a mod, but since the provisions for alternate endstop microswitch location are included with the official release, I feel like it's relevant to possibly include...