toolhead PCBs - possibly rotate JST connectors for PCF and HEF?

[BerzerkaDurk]

When I built my Trident, I cut my fan wires to the right length and put new JST connectors in the original fan's connector orientation. Turns out, that puts the + and - wires reversed from the board markings

I actually assumed that gdstime had their wires reversed, but after looking at several different fans' JST connectors they are all the same.

Is it possible in future revs to reverse the connector silks, or at least document that the wires are the reverse of what the industry conventions seem to be?

[flermel]

Hi, I had the same observation. The JST connectors on the toolhead pcb are reversed.