Anime4000

> > @stich86 when you done, I want to know your feedback 😄 > > positive feedback mate! Now the UI is working perfect :) That's good to hear that...

@EnfermeraSexy no, it seem original code don't have it. Firefox cannot execute when wrong Mime Type Chrome can execute even wrong Mime Type this is reason original WebGUI look horrible...

Yes, they do have, I just arrange neatly

the WebGUI is not complete yet, since we can't reverse engineer the binary to show Link Speed, etc like OpenWRT, I planing to approach differently at CPU efficient still, for...

I also experimenting may I know, did your ISP have forced specific LAN port of ONT for Internet Access? here in Malaysia (TM Unifi), this ONT doesn't wok when have...

What I can guess is, the `FwdOp: 0x10` is very problematic, Your ISP uses `FwdOp: 0x10` for special bridging, since VoIP only available that mean VSOL accept that and ignore...

it use same chip as ODI Stick, maybe get all OMCI Info and copy it over ODI Stick, it should work as usual

try this: ``` omcicli mib set 84 0x02 FwdOp 0x02 ``` what is this? [refer to this](https://github.com/Anime4000/RTL960x/pull/94#issuecomment-1319016018)

like this, you need to use HGU firmware: https://github.com/Anime4000/RTL960x/blob/main/Firmware/DFP-34X-2C2/M114_sfp_ODI_hybrid_221209.tar create a WAN Bridge for VLAN 4015 or 4011 as your ISP not using ME 171

the stick have two boot partition, r0, k0 and r1, k1 use UART and switch boot, reboot you will boot another partition and reflash again with correct firmware