VSOL 2802RH O5 status no internet connection

[Faruolo2]

Hello, im trying to replace Nokia G-240W-C ONT to VSOL 2802RH and after set all configurations, i could get a VLAN return on omcicli mib get 84 as of:

AP#omcicli mib get 84
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
VlanTagFilterData
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
=================================
EntityID: 0xe102
FilterTbl[0]: PRI 0,CFI 0, VID 1107
FwdOp: 0x10
NumOfEntries: 1
=================================
=================================
EntityID: 0xe103
FilterTbl[0]: PRI 0,CFI 0, VID 1107
FwdOp: 0x10
NumOfEntries: 1
=================================
=================================
EntityID: 0xe10b
FilterTbl[0]: PRI 0,CFI 0, VID 1107
FwdOp: 0x10
NumOfEntries: 1
=================================

AP#omcicli mib get 171
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
ExtVlanTagOperCfgData
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
=================================
EntityId: 0xe01
AssociationType: 10
ReceivedFrameVlanTagOperTableMaxSize: 0
InputTPID: 0x8100
OutputTPID: 0x8100
DsMode: 0
ReceivedFrameVlanTaggingOperTable
INDEX 0
Filter Outer : PRI 8,VID 220, TPID 5
Filter Inner : PRI 8,VID 4096, TPID 0, EthType 0x00
Treatment Outer : PRI 15,VID 0, TPID 0, RemoveTags 1
Treatment Inner : PRI 9,VID 1107, TPID 3
INDEX 1
Filter Outer : PRI 15,VID 4096, TPID 0
Filter Inner : PRI 8,VID 220, TPID 5, EthType 0x00
Treatment Outer : PRI 15,VID 0, TPID 0, RemoveTags 1
Treatment Inner : PRI 8,VID 1107, TPID 2
INDEX 2
Filter Outer : PRI 8,VID 210, TPID 5
Filter Inner : PRI 8,VID 4096, TPID 0, EthType 0x00
Treatment Outer : PRI 15,VID 0, TPID 0, RemoveTags 1
Treatment Inner : PRI 9,VID 1107, TPID 3
INDEX 3
Filter Outer : PRI 15,VID 4096, TPID 0
Filter Inner : PRI 8,VID 210, TPID 5, EthType 0x00
Treatment Outer : PRI 15,VID 0, TPID 0, RemoveTags 1
Treatment Inner : PRI 8,VID 1107, TPID 2
INDEX 4
Filter Outer : PRI 15,VID 4096, TPID 0
Filter Inner : PRI 15,VID 0, TPID 5, EthType 0x00
Treatment Outer : PRI 15,VID 0, TPID 0, RemoveTags 3
Treatment Inner : PRI 15,VID 0, TPID 2
INDEX 5
Filter Outer : PRI 14,VID 4096, TPID 5
Filter Inner : PRI 14,VID 4096, TPID 0, EthType 0x00
Treatment Outer : PRI 15,VID 0, TPID 0, RemoveTags 3
Treatment Inner : PRI 15,VID 4096, TPID 3
INDEX 6
Filter Outer : PRI 15,VID 4096, TPID 0
Filter Inner : PRI 14,VID 4096, TPID 5, EthType 0x00
Treatment Outer : PRI 15,VID 0, TPID 0, RemoveTags 3
Treatment Inner : PRI 15,VID 4096, TPID 2
AssociatedMePoint: 0x601

after configuring WAN with 1107 vlan still no internet connection, any1 know what i could do?

Edit: when im connect with Vlan 1107, i can get a strange ip in the range of 10.52.15.XX without internet connection

[ToTheCLI]

Similar Issue

https://github.com/Anime4000/RTL960x/issues/121

[ToTheCLI]

Try setting FwdOp to 0x02 for each entityID Alone with the following commands then check for Internet then reboot after no connection omcicli mib set 84 0xe102 FwdOp 0x02 Then check for connection on VLAN 1107 No connection reboot then omcicli mib set 84 0xe103 FwdOp 0x02 Then check for connection on VLAN 1107 No connection reboot then omcicli mib set 84 0xe10b FwdOp 0x02

[Faruolo2]

Tried all, still no connection :(

[Anime4000]

I also experimenting

may I know, did your ISP have forced specific LAN port of ONT for Internet Access?

here in Malaysia (TM Unifi), this ONT doesn't wok when have LAN Port Provisioning (aka: 4 LAN port ONU Emulation)

[Faruolo2]

No, just wan port and 4 lan ports to connect.

Also some information that i forgot to add.

When im using Vlan 1107, with DHCP on windows i get a strange ip like 10.52.15.5 but without internet connection

someone said to me that this IP 10.XX.XX.XXX is a VOIP ip used by my ISP

[Anime4000]

What I can guess is, the FwdOp: 0x10 is very problematic, Your ISP uses FwdOp: 0x10 for special bridging, since VoIP only available that mean VSOL accept that and ignore the rest.

my fiber wholesale set their OLT to force ONU LAN 2 and disable other ONU LAN, only can hack the bridge is ODI SFU firmware

sad to say, I can't reverse engineering much on VSOL V2802RH.

you need to use ODI Stick with SFU Firmware + Media Converter

[d5aqoep]

You get a 10.xx.xx.xx IP means your ONU is working perfectly. You just need the correct VLAN of internet. Maybe you can get it from your ISP or ask a service engineer to get it from their backend.

[Faruolo2]

You get a 10.xx.xx.xx IP means your ONU is working perfectly. You just need the correct VLAN of internet. Maybe you can get it from your ISP or ask a service engineer to get it from their backend.

yeah, aparently provisioning is OK. The problem is that this IP range is for VOIP. i confirmed this because if i check directly on ONT provided by ISP, VOIP is coming from a Ip range 10.15.5.XX on Vlan 220.

and internet comes from a ip range 187.15.181.XX on Vlan 210

[Faruolo2]

updating

after executing

omcicli mib set 84 0xe102 FwdOp 0x02 omcicli mib set 84 0xe103 FwdOp 0x16 omcicli mib set 84 0xe10b FwdOp 0x02

i could get internet conection trough IpoE routing.

[Faruolo2]

updating 2:

setting FwdOp 0x15 or 0x00 on entity 0xe103 bridge works...