O5 but cannot surf. mib get 84 have 4011 vlan, but 171 cannot

[Leozaki]

PCCW HK. original ONU is HG8040/HG8045

# omcicli mib get 84
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
VlanTagFilterData
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
=================================
EntityID: 0x01
FilterTbl[0]: PRI 0,CFI 0, VID 4011
FwdOp:  0x04
NumOfEntries: 1
=================================
# omcicli mib get 171
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
ExtVlanTagOperCfgData
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
#

PON_VENDOR_ID GPON_ONU_MODEL HWVER GPON_SN ELAN_MAC_ADDR MAC_KEY ONT AUTHENTICATION MODE:ASCII all set. flashed all firmware here still no luck. I set that VLAN-4011 in PVE(BCM57810) but still cannot connect.(untag tested..) What value or setting should I check it next?

[Anime4000]

try this:

omcicli mib set 84 0x02 FwdOp 0x02

what is this? refer to this

[Leozaki]

# omcicli mib get 171
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
ExtVlanTagOperCfgData
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
# omcicli mib get 84 | grep '^EntityID:' | awk '{print $2}'
0x01
# omcicli mib get 84 ${_EntityID} | grep '^FwdOp:' | awk '{print $2}'
0x02
#
# omcicli mib set 84 0x01 FwdOp 0x02
# omcicli mib get 171
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
ExtVlanTagOperCfgData
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
# omcicli mib get 84
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
VlanTagFilterData
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
=================================
EntityID: 0x01
FilterTbl[0]: PRI 0,CFI 0, VID 4011
FwdOp:  0x02
NumOfEntries: 1
=================================
# omcicli mib get 171
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
ExtVlanTagOperCfgData
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
#

still cannot surf..

[Leozaki]

# omcicli mib get 84 ${_EntityID} | grep '^FwdOp:' | awk '{print $2}'
0x04
# omcicli mib get 84 | grep '^EntityID:' | awk '{print $2}'
0x01
# omcicli mib get 84
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
VlanTagFilterData
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
=================================
EntityID: 0x01
FilterTbl[0]: PRI 0,CFI 0, VID 4011
FwdOp:  0x04
NumOfEntries: 1
=================================
#


# diag
RTK.0> l2-table get entry address valid

LUT address: 0x00ac (1K LUT)
L2 Unicast table:
MACAddress        Spa Fid Age Vid  State  Ext  Hash
58:47:CA:72:00:8C 0   0   7   0    Auto   0    SVL
CtagIf Auth DaBlock SaBlock Arp
Dis    Dis  Dis     Dis     Dis

LUT address: 0x0148 (1K LUT)
L2 Unicast table:
MACAddress        Spa Fid Age Vid  State  Ext  Hash
78:1D:BA:8F:6F:6D 2   0   6   4015 Auto   0    SVL
CtagIf Auth DaBlock SaBlock Arp
En     Dis  Dis     Dis     Dis

LUT address: 0x016c (1K LUT)
L2 Unicast table:
MACAddress        Spa Fid Age Vid  State  Ext  Hash
00:E0:4C:86:70:01 3   0   1   0    Static 0    SVL
CtagIf Auth DaBlock SaBlock Arp
Dis    Dis  Dis     Dis     Dis

RTK.0>

maybe my isp have dynamic FwdOp....

[Anime4000]

like this, you need to use HGU firmware: https://github.com/Anime4000/RTL960x/blob/main/Firmware/DFP-34X-2C2/M114_sfp_ODI_hybrid_221209.tar

create a WAN Bridge for VLAN 4015 or 4011

as your ISP not using ME 171

[Leozaki]

I tried. but no work..