Anakiev2

I've done some more debugging and the presents of `.so` in the path creates the problem. I don't know if this is Arch Linux specific issue. This is my updated...

This can be caused by cold solder joint on GP6 and a good one on GP7. I would reflow all pins on the Raspberry Pi Pico board or at least...

@papa-MG I have few Ideas I hope I can explain them: Try this: power on the Gamecube, plug the receiver partially until you see the blue light from the receiver,...

I've successfully build identical binaries: ``` Files orig/gcvideo-dvi-shuriken-gc-3.1-M25P40-complete.xsvf and mine/gcvideo-dvi-shuriken-gc-3.1-M25P40-complete.xsvf are identical Files orig/gcvideo-dvi-shuriken-gc-3.1-spirom-complete.bin and mine/gcvideo-dvi-shuriken-gc-3.1-spirom-complete.bin are identical Files orig/gcvideo-dvi-shuriken-gc-3.1-spirom-impact.cfi and mine/gcvideo-dvi-shuriken-gc-3.1-spirom-impact.cfi differ Files orig/gcvideo-dvi-shuriken-gc-3.1-spirom-impact.mcs and mine/gcvideo-dvi-shuriken-gc-3.1-spirom-impact.mcs are identical ```...

I am not sure if I can resolve all dependencies for building the updater .dol file and if I screw something up many boards will be bricked. > You can...

> For the meantime I have been using a workaround where I power the receiver using the USB C port on the front connected to my tv, this has prevented...

Oh, that's such a shame and waste of time. Actually I was working on much better solution but without their version of the source code there is nothing I can...

That's even bigger shame on 8BitDo. I was thinking of buying their wireless Gamecube controller kit (if they rotate the main analog stick to match the original) but I will...

@ikorb What is the potential risk if we force install the open source firmware? For example if they use different pins and we send voltage on signals we should only...

This can be caused by cold solder joint on GP6 and a good one on GP7. I would reflow all pins on the Raspberry Pi Pico board or at least...