Don Kelly
Don Kelly
How are you powering your antenna? Are you using an external bias tee?
For what you're trying do, you may want to consider trying the gnss-sdrlib code on github instead. I'm working on something sort of similar myself using gnss-sdrlib, and may port...
Álvaro, Sure. I’ll take a look at the RTL-SDR and the SiGe tutorials and come up some ideas. Don Don Kelly Agile Engineering LinkedIn: www.linkedin.com/in/kellydak Cell: 281-221-2853 4403 Orange Leaf...
GNSS-SDR Community, If you’ve ever wondered what a “good signal” means for operating GNSS-SDR, below is a memo on my experiences to date. Would welcome any feedback on what others...
Alvaro, Sure, I can give it a try. I’m not currently a heavy github user, and am not familiar with uploading files, but guessing it can’t be too hard once...
You’ll find more write-ups on my linkedIn site as well. Unfortunately I’m not able to make the time to create full-blown tutorials and post to the gnss-sdr site, but I’ll...
Malte, I haven’t run GNSS-SDR in quite a while now, but attached are a few conf files I found. Also, it appears I may have been configuring the bladeRF first...
HI, I'm having the same issue with my HackRF One. It starts tracking on a channel, then loses it about 10 sec later. Has anyone creates a good conf file...
Thx. I just get this repeated: Tracking of GPS L1 C/A signal started on channel 0 for satellite GPS PRN 17 (Block IIR-M) Current receiver time: 22 min 31 s...
Got both the hackrf and an rtl-sdr processing L1. Had to drop the gains to 30, 30, 22 for my particular antenna. Both lock in about 45 sec. Got the...