5axes

https://github.com/Ultimaker/Cura/issues/15807 & https://github.com/Ultimaker/Cura/issues/15790 & https://github.com/Ultimaker/Cura/issues/15836

No need for additionnal info ... I can reproduce the problem and clearly this is a problem linked to Cura itself. We'll just have to hope that the development team...

As mentionned in the ISO 3098 " The Choice Between these characters is left to the national bodies"  But in a Font File as the 7 can only be...

Hello, Unfortunatly my own Font definition is not based on this Project so I cannot make just a basic PR. But you can find herewith an export of this Glypht....

Any suggestion will be welcome

It's not an issue the value display by the code is the real F value so it's a speed in mm/min to get the value in mm/s as defined in...

On my point of view Hilbert infill in Slic3r or Prusa Slicer is just crap. It's not a real Hilbert trajectory (Ie : fill one layer starting from one point...

Same for the Top/Bottom pattern , it's base on a pattern, start from one corner, Switch to the opposite with a lot of direction change not very suitable for this...

From my point of view if you really want to occupy your rainy days the integration of decorative geometric patterns as on the example below would really be a solution...

You are welcome to use these information if you think they are usefull