3djc comments

Results 460 comments of


                                            3djc

Radio Setup | Backlight | Contrast doesn't load on start, until you look at the setting in menu

Cannot replicate, working as expected here on newly flashed 2.11.1 on Pocket

Radio Setup | Backlight | Contrast doesn't load on start, until you look at the setting in menu

Try the same on a new blank SD card. It works absolutely fine here, will record a video later

Radio Setup | Backlight | Contrast doesn't load on start, until you look at the setting in menu

Ideally BACKUP RADIO and MODELS and delete those in bootloader. Start radio and try.

Radio Setup | Backlight | Contrast doesn't load on start, until you look at the setting in menu

https://photos.app.goo.gl/zCg6nYzNevESQRrm8

Radio Setup | Backlight | Contrast doesn't load on start, until you look at the setting in menu

I loaded your file, it still works fine here

Radio Setup | Backlight | Contrast doesn't load on start, until you look at the setting in menu

maybe backup your file, reformat card and retry ?

Jumper T15 - 2.11.1 - used on two models (F3K) / DLG and had on both models RC outage short after launch.

Why exactly are you posting this, if by your own admission, you will not work on that ? Why should unpaid volunteers work on your issue when you don't ?...

FrSky X10S Express: dangerous spike on channel associated with RV stick using ELRS 900 MHz modules on EdgeTX V2.11 (main branch)

I don't think you have proven in any way that a problem exist in 2.11. You have proven through your research that you have hardware based RF issue, that's the...

FrSky X10S Express: dangerous spike on channel associated with RV stick using ELRS 900 MHz modules on EdgeTX V2.11 (main branch)

I don't think 'problem' is the right word. As it is all about timing, different compilers can produce various levels of optimisation and therefore affect timings. This is also why...

SDcard doesn't get remounted after unplug

Fair comment, the whole handling needs to be reviewed. In 2.10, user would regain UI when card was replugged, not anymore. Currently, the fatFS layer keeps volume mounted even when...