3djc
Mine was pwm output measured with an esp32. If you get proper sbus out, it means the radio is doing its job.
The thing is, what the radio sends is strictly the same, like there is no difference AT ALL, that you look at receiver sbus out or pwm pulse. There is...
That leaves a question: either there is an edgetx adc issue reading the sticks (but then why only one of the axis, and none of the other axis / pots...
That won't happen since I don't have any archer gear or that radio
MPM should handle 1ms sync (redpine protocol is the fastest update rate)
Is it not defaulted for all radio ? I'm at least not excluding it
Tested Boxer, same issue, so my guess it affect all BW radios
Yeah but OTX had models in eeprom. The issue is you can run into boot loops if the source of the EM is sd card related. Need to assess what...
I have successfully run RTC_BACKUP_RAM based EM on a RM Boxer, will do a PR for BW F4 when I'm physically capable
Leaving it at current scale does have the great side benefit of leaving current model programming untouched. It does have the drawback to not add precision at programing (LS, SF,..),...