Sohail Asif

conda-forge based robotology-superbuild Installation facing erorr in cloning YARP

11

i am doing conda-forge based robotology-superbuild Installation facing error in cloning YARP. **The steps i'm following here are:** https://github.com/robotology/robotology-superbuild/blob/9761ab99b7cb1f0600d9434e032ff76da4ae7b79/doc/conda-forge.md#source-installation **The error is:** Cloning into 'YARP'... error: 6829 bytes of body...

Getting error while configuring the example tutorial_joint-interface.git

1

**Because of error i reinstall the robotology-superbuild but still this error occur** Example available at: [https://icub-tech-iit.github.io/documentation/sw_installation/check_your_installation/#check-yarp](url) **Complete error log :** (robsub) sohail@sohail-Lenovo-V14-G3-IAP:~/tutorial_joint-interface$ gazebo tutorial_joint-interface.sdf **../src/intel/isl/isl.c:2105: FINISHME: ../src/intel/isl/isl.c:isl_surf_supports_ccs: CCS for 3D...

I need to install spyder in envoirment name robsub but getting error

1

## Problem Description i am using linux i need to install spyder in envoirment name robsub but getting error * Spyder version: 3.8 or 3.9 * conda version : 24.1.2...

Error: Module not found YARP when i try to use it using python 3.11

21

I will describe what i did from start: **1.** I did source install in robsub envoirment unsing Conda forge. steps i follow (https://github.com/robotology/robotology-superbuild/blob/master/doc/conda-forge.md#binary-installation) **2.** Then i install this example in...

Installing robotology superbuild but package (gz-sim8) did not installed

30

**1)** And i install python 3.11 with spyder 5.5.4 when i try to run this example it show error of (yarp module not found) [https://robotology.github.io/robotology-documentation/doc/html/icub_python_basic_motor.html] **step i follow when run...

Hi, i am using Gazebo-11 for ICUB humanoid robot. Well now need to use ears of robot for that it must have auditory sensor (microphone) but i am unable to...

Error : Failed to connect to the camera module in Gazebo with yarp server

1

@LoreMoretti I am working on gazebo with an icub humanoid robot model running this example [https://icub-tech-iit.github.io/documentation/sw_installation/check_your_installation/#check-icub](url) when I run these commands it shows that it did not connect with the...