Jesse Davis
Jesse Davis
https://github.com/FOME-Tech/fome-fw/issues/313 probably the same issue, should be merged.
I think the TPS/TPS Accel Enrichment table may also have this same issue. While activating accel enrichment, the cells were never highlighted.
https://hypertuner.cloud/#/t/4OMw3o1W7_/logs/2024_01_24_13_36_58_idle_cut_TOXp4TNenA.csv Sorry for the delay, hope this works.
> I think we already try to reset PID when not running, but I'm not sure what's up in your log. It could be that I never keyed off after...
I like the switch approach. Additionally, one of the weaknesses of the current approach is that the bias parameter and the y-axis of the blend table must be the same....
Understood. So in order to make a switchable axis algorithm (i.e. SD at low load, TPS at high load) the y-axis of the blend table would need to be selectable.
@mck1117 I'll likely send it over CAN from an external source, but of course there are enough rotational speed inputs on most hardware to bring both signals directly into the...
Is it possible to have AFR/lambda as a line graph? I find those more useful than a round gauge.
For those wanting traction control (i'm hoping to make it in LUA eventually) Front VSS Rear VSS or one for each corner
EMAP (exhaust pressure)