Time-Appliance-Project
Time-Appliance-Project copied to clipboard
opencomputeproject
Develop an end-to-end hypothetical reference model, network architectures, performance objectives and the methods to distribute, operate, monitor time synchronization within data center and much more....
Title block shows: ``` Cannot open file C:\Users\beta\Desktop\TimecardLogo\TIMECARD.jpg. File does not exist. ``` Title block shows "*" for sheet number starting with third sheet.
I'm experiencing issues as I'm following along the Time Card installation and usage guide. OS: Ubuntu 22.04.4 LTS x86_64 Host: NUC9VXQNX K47173-402 Kernel: 5.15.0-101-generic Being on Ubuntu 22.04.4 I went...
Seems that the 3.3V bidirectional drivers connected to the SMA connectors of one TimeCard in output mode can not be connected to another TimeCard input with 50 Ohm termination since...
There appears to be a mismatch between the silkscreen designators and the actual footprints for R8 and R33 on the OCXO Daughter Card V4 PCB. According to the BOM, R33...
While manufacturing the OCXO Daughter Card it was found that resistor R6 interferes physically with the placement of the Abracon AOCJYR OCXO (Y3). R6 should be marked as DNP (Do...
I got a driver crash while working with the time stick given to me during ISPCS2024 on my up-to-date Debian Bookworm machine. It uses kernel 6.1.0-26-amd64. It looks like one...
Please forgive me if this has already been issued. I'm kinda new to this project, and is working on a Verilog (instead of VHDL) version of the Time Card's FPGA...
There are 3 TimeCards. I want to make a stand of 3 TimeCards with a serial connection via 10 MHz SMA and one GPS source. I tried connecting the cards...
Metadata
Owner
Metadata
Develop an end-to-end hypothetical reference model, network architectures, performance objectives and the methods to distribute, operate, monitor time synchronization within data center and much more....