spinnaker_sdk_camera_driver

spinnaker_sdk_camera_driver copied to clipboard

Failed to load nodelet

4

1617176618.356471112 Node Startup 1617176618.447406042 ERROR /vision_nodelet_manager [/tmp/binarydeb/ros-melodic-nodelet-1.9.16/src/loader.cpp:301(Loader::load)] [topics: /rosout] The error before refreshing the cache was: Failed to load library /home/davy/14-spinnaker_ws/devel/lib//libacquilib.so. Make sure that you are calling the PLUGINLIB_EXPORT_CLASS macro...

fys445089968

Failed to load nodelet '/acquisition_node` of type `acquisition/capture_nodelet` to manager `vision_nodelet_manager'

8

**System Description** Camera Name and Model: BFS-U3-28S5C-C Operating System: Ubuntu 18.04 Spinnaker Version: 2.0.0.147 ROS Version: Melodic 1.14.10 ***Computer details*** Processor: Intel i7-6600u 2.6 GHz RAM: 16GB ***Multiple Cameras Only***...

dostyaaa

Failed waiting for EventData on NEW_BUFFER_DATA event [-1011]

17

Hi, I use two camera (BFS-U3-16S2C-CS), and I connect this two camera to my laptop's two different USB3 port. Then I follow your document rewrite the "test.yaml" ` cam_ids: -...

liuxiangdi

Jetson AGX Xavier - Unable to capture synchronised shutter using master configuration

1

System Description Camera Name and Model: 2x Blackfly S (USB3, connected via Sync cable) Operating System: Ubuntu 18.04.5 Spinnaker Version: 2.2.0.48 ROS Version: Melodic Computer details Processor: Nvidia AGX Xavier...

jwurts-mitre

[WARN] Image incomplete with image status 9. [WARN] Frames are being skipped. [FATAL]Failed waiting for eventdata on NEW_BUFFER_DATA event. Likey reason is that slaves are not triggered. Check GPIO cables...

Xulei-Zhai

ROS publish rate is significantly below camera framerate

9

**System Description** Camera Name and Model: FLIR Blackfly S BFS-U3-50S5C-C Operating System: Ubuntu 18.04 Spinnaker Version: 2.4.0.143 (arm64) ROS Version: Melodic ***Computer details*** Processor: Jetson TX2 (4 ARMv8 cores) RAM:...

rgov

Unable to execute trigger. Aborting...

5

Hi, Thanks for the nice tool and the support. I have followed your previous answers to comment out the configurations, which cameras does not allow. But I faced some other...

Karthikeyanc2

unable to relaunch the node after shutting it down

5

I am currently trying to configure the parameters for my camera and usually I need to shut down the current node, change something in the config file and then relaunch...

rishabhkjain

civerachb-cpr

Building on Jetson AGX Xavier running Jetpack 4.3 (Ubuntu 18.04)

4

I am trying setup this package on an Xavier which runs 18.04 (thus ROS melodic). As OpenCV is already installed with Jetpack (OpenCV 4 on Jetpack 4.3), and due to...

rishabhkjain