spinnaker_sdk_camera_driver icon indicating copy to clipboard operation
spinnaker_sdk_camera_driver copied to clipboard

Published 20 hours ago • verified publisher icon neufieldrobotics

unable to relaunch the node after shutting it down

Open rishabhkjain opened this issue 5 years ago • 5 comments
trafficstars

I am currently trying to configure the parameters for my camera and usually I need to shut down the current node, change something in the config file and then relaunch the node. However, whenever I shut down the node (with ctrl+c) and try to relaunch the node, I always get an error stating that I may have the wrong binning number set. If I unplug and replug the camera from my computer and launch the node, it works fine. Is there a "cleaner" way to shut down the node so that I don't have to physically unplug and replug the camera?

rishabhkjain avatar Jun 30 '20 00:06 rishabhkjain

I think for the binning, there is a bug in the firmware, where changing binning from 1 to 2 is fine, but when going 2 to 1 only shows a part of the image. The only way to fix this is to unplug and replug. We reported that to FLIR as well. You can try this even with SpinView and you should observe the issue. What other settings are you having issues with? Does it happen in SpinView as well?

ghost avatar Jun 30 '20 01:06 ghost

The problem I am having is not just for when I change the settings. For example, I will launch the node and it will work fine, and then I will shut it down using Ctrl + C in the terminal window where I had launched the node. However, if I try to launch the node again, it gives me an error.

Here is an excerpt of the error that I get when I relaunch the node. I have Blackfly USB camera with a color sensor. The entire log is available here log.txt

[ INFO] [1593527743.988362537]: *** FLUSH SEQUENCE ***
[ INFO] [1593527743.988549487]: Initializing cameras...
[ INFO] [1593527744.831369380]: Deinitializing cameras...
[ INFO] [1593527744.871539190]: All cameras deinitialized.
[ INFO] [1593527746.872093483]: Initializing cameras...
[FATAL] [1593527747.563748855]: Error: Spinnaker: GenICam::OutOfRangeException= Value = 1 must be equal or greater than Min = 2. : OutOfRangeException thrown in node 'BinningHorizontal' while calling 'BinningHorizontal.SetValue()' (file 'IntegerT.h', line 79) [-2002]
[ WARN] [1593527747.564132962]: Most likely cause for this error is if your camera can't support color and your are trying to set it to color mode
[FATAL] [1593527747.772046425]: Failed to load nodelet '/acquisition_node` of type `acquisition/Capture` to manager `vision_nodelet_manager'
terminate called after throwing an instance of 'Spinnaker::Exception'
  what():  Spinnaker: Camera is not streaming [-1010]
[acquisition_node-3] process has died [pid 9980, exit code 255, cmd /opt/ros/melodic/lib/nodelet/nodelet load acquisition/Capture vision_nodelet_manager __name:=acquisition_node __log:=/home/avsensors/.ros/log/f6a0b5e6-bade-11ea-aa4b-9abe2142ed9d/acquisition_node-3.log].
log file: /home/avsensors/.ros/log/f6a0b5e6-bade-11ea-aa4b-9abe2142ed9d/acquisition_node-3*.log
^C[vision_nodelet_manager-2] killing on exit
[vision_nodelet_manager-2] escalating to SIGTERM
[rosout-1] killing on exit
[master] killing on exit
shutting down processing monitor...
... shutting down processing monitor complete
done

rishabhkjain avatar Jun 30 '20 14:06 rishabhkjain

I am not able to reproduce the issue on the dev brach on Ubuntu 16.04, amd 64 system with Spinnaker 2.0.0.147. Not sure what is going on. Can you run spinview and take a look at which values you are allowed to set for binning on your camera. Also try the sequence in spinviewe to see if you can reproduce:

  1. Set binning to 1
  2. Start acquisition
  3. Stop acquisition
  4. Try setting the binning to 1 or 2

Separate from all this, another thing you could do, is put that line in a try catch block for this particular error.

ghost avatar Jun 30 '20 16:06 ghost

I hane met the same problem .

` roslaunch spinnaker_sdk_camera_driver acquisition.launch ... logging to /home/xulei/.ros/log/2c890876-cc1c-11eb-be58-378c21975153/roslaunch-xulei-BATTLE-AX-B365M-HD-PRO-8131.log Checking log directory for disk usage. This may take a while. Press Ctrl-C to interrupt Done checking log file disk usage. Usage is <1GB.

started roslaunch server http://xulei-BATTLE-AX-B365M-HD-PRO:39781/

SUMMARY

PARAMETERS

  • /acquisition_node/binning: 1
  • /acquisition_node/cam_aliases: ['cam0']
  • /acquisition_node/cam_ids: [19085011]
  • /acquisition_node/color: False
  • /acquisition_node/delay: 1.0
  • /acquisition_node/distortion_coeffs: [[-0.021141875266...
  • /acquisition_node/distortion_model: plumb_bob
  • /acquisition_node/exposure_time: 0
  • /acquisition_node/external_trigger: False
  • /acquisition_node/flip_horizontal: [False]
  • /acquisition_node/flip_vertical: [False]
  • /acquisition_node/frames: 3400
  • /acquisition_node/gain: 0
  • /acquisition_node/image_height: 1080
  • /acquisition_node/image_width: 1440
  • /acquisition_node/intrinsic_coeffs: [[1886.9232141485...
  • /acquisition_node/live: False
  • /acquisition_node/live_grid: False
  • /acquisition_node/master_cam: 19085011
  • /acquisition_node/max_rate_save: False
  • /acquisition_node/projection_coeffs: [[913.700317, 0.0...
  • /acquisition_node/rectification_coeffs: [[1.0, 0.0, 0.0, ...
  • /acquisition_node/region_of_interest/height: 0
  • /acquisition_node/region_of_interest/width: 0
  • /acquisition_node/region_of_interest/x_offset: 0
  • /acquisition_node/region_of_interest/y_offset: 0
  • /acquisition_node/save: False
  • /acquisition_node/save_path: ~
  • /acquisition_node/save_type: bmp
  • /acquisition_node/skip: 20
  • /acquisition_node/soft_framerate: 30
  • /acquisition_node/target_grey_value: 0
  • /acquisition_node/tf_prefix:
  • /acquisition_node/time: False
  • /acquisition_node/to_ros: True
  • /acquisition_node/utstamps: False
  • /rosdistro: noetic
  • /rosversion: 1.15.11

NODES / acquisition_node (nodelet/nodelet) vision_nodelet_manager (nodelet/nodelet)

auto-starting new master process[master]: started with pid [8146] ROS_MASTER_URI=http://localhost:11311

setting /run_id to 2c890876-cc1c-11eb-be58-378c21975153 process[rosout-1]: started with pid [8163] started core service [/rosout] process[vision_nodelet_manager-2]: started with pid [8170] process[acquisition_node-3]: started with pid [8171] [ INFO] [1623570694.961430684]: Initializing nodelet with 8 worker threads. [ INFO] [1623570695.077213610]: Initializing nodelet [ INFO] [1623570695.077938043]: [ OK ] USB memory: 1000 MB [ INFO] [1623570695.077992405]: *** PARAMETER SETTINGS *** [ INFO] [1623570695.078002516]: ** Date = 20210613 [ INFO] [1623570695.078428485]: Save path set via parameter to: /home/xulei [ INFO] [1623570695.078452521]: Camera IDs: [ INFO] [1623570695.078775180]: 19085011 [ INFO] [1623570695.079054258]: Camera Aliases: [ INFO] [1623570695.079072604]: 19085011 >> cam0 [ INFO] [1623570695.079355583]: External trigger: false [ INFO] [1623570695.079866823]: Unique time stamps for each camera: false [ INFO] [1623570695.080149094]: color set to: false [ INFO] [1623570695.080408058]: 19085011 flip_horizontal 0 [ INFO] [1623570695.080628096]: 19085011 flip_vertical 0 [ INFO] [1623570695.080842387]: Exporting images to ROS: true [ INFO] [1623570695.081059234]: Showing live images setting: false [ INFO] [1623570695.081269842]: Showing grid-style live images setting: false [ INFO] [1623570695.081447536]: Max Rate Save Mode: false [ INFO] [1623570695.081682338]: Displaying timing details: false [ INFO] [1623570695.081860659]: No. of images to skip set to: 20 [ INFO] [1623570695.082086075]: Init sleep delays set to : 1.00 sec [ WARN] [1623570695.082318033]: 'fps' Parameter not set, using default behavior: fps=20.00 [ INFO] [1623570695.082530803]: 'exposure_time'=0, Setting autoexposure [ INFO] [1623570695.082756144]: 'gain' Parameter was zero or negative, using Auto gain based on target grey value [ INFO] [1623570695.082987243]: 'target_grey_value'=0, Setting AutoExposureTargetGreyValueAuto to Continuous/ auto [ INFO] [1623570695.083199161]: Binning set to: 1 [ INFO] [1623570695.083425343]: Using Software rate control, rate set to: 30 [ INFO] [1623570695.083647827]: Saving images set to: 0 [ INFO] [1623570695.084162869]: tf_prefix set to: [ INFO] [1623570695.084942086]: Region of Interest set to width: 0 height: 0 offset_x: 0 offset_y: 0 [ INFO] [1623570695.085141918]: Camera Intrinsic Paramters: [ INFO] [1623570695.085264158]: 1886.923214 0.000000 604.721488 0.000000 1886.666877 493.477267 0.000000 0.000000 1.000000 [ INFO] [1623570695.085463379]: Camera Distortion Paramters: [ INFO] [1623570695.085493995]: -0.021142 -0.373387 2.385983 3.282457 [ INFO] [1623570695.085774528]: Camera Rectification Paramters: [ INFO] [1623570695.085800703]: 1.000000 0.000000 0.000000 0.000000 1.000000 0.000000 0.000000 0.000000 1.000000 [ INFO] [1623570695.086108196]: Camera Projection Paramters: [ INFO] [1623570695.086158334]: 913.700317 0.000000 953.448302 0.000000 0.000000 1063.296631 777.871993 0.000000 0.000000 0.000000 1.000000 0.000000 [ INFO] [1623570695.086169044]: Camera coeffs provided, camera info messges will be published. [ INFO] [1623570695.086189269]: *** SYSTEM INFORMATION *** [ INFO] [1623570695.086198281]: Creating system instance... [ INFO] [1623570695.086206270]: spinnaker_sdk_camera_driver package version: 1.1.0 [ INFO] [1623570695.919716940]: Spinnaker library version: 2.4.0.143 [ INFO] [1623570695.919825153]: Retreiving list of cameras... [ INFO] [1623570695.925620902]: Numer of cameras found: 1 [ INFO] [1623570695.925729798]: Cameras connected: 1 [ INFO] [1623570695.927520700]: -19085011 Blackfly S BFS-PGE-16S2C 1705.0.63.0 [ INFO] [1623570695.979861596]: Dynamic Reconfigure: Level : 4294967295 [ INFO] [1623570695.980551016]: *** FLUSH SEQUENCE *** [ INFO] [1623570695.980569081]: Initializing cameras... [ INFO] [1623570696.556836531]: Deinitializing cameras... [ INFO] [1623570696.766786521]: All cameras deinitialized. [ INFO] [1623570698.767073044]: Initializing cameras... [FATAL] [1623570699.133026746]: Error: Spinnaker: GenICam::OutOfRangeException= Value = 1 must be equal or greater than Min = 2. : OutOfRangeException thrown in node 'BinningHorizontal' while calling 'BinningHorizontal.SetValue()' (file 'IntegerT.h', line 79) [-2002] [ WARN] [1623570699.133060426]: Most likely cause for this error is if your camera can't support color and your are trying to set it to color mode [FATAL] [1623570699.281441032]: Failed to load nodelet '/acquisition_nodeof typeacquisition/Captureto managervision_nodelet_manager' [acquisition_node-3] process has died [pid 8171, exit code 255, cmd /opt/ros/noetic/lib/nodelet/nodelet load acquisition/Capture vision_nodelet_manager __name:=acquisition_node __log:=/home/xulei/.ros/log/2c890876-cc1c-11eb-be58-378c21975153/acquisition_node-3.log]. log file: /home/xulei/.ros/log/2c890876-cc1c-11eb-be58-378c21975153/acquisition_node-3*.log [vision_nodelet_manager-2] process has died [pid 8170, exit code -11, cmd /opt/ros/noetic/lib/nodelet/nodelet manager __name:=vision_nodelet_manager __log:=/home/xulei/.ros/log/2c890876-cc1c-11eb-be58-378c21975153/vision_nodelet_manager-2.log]. log file: /home/xulei/.ros/log/2c890876-cc1c-11eb-be58-378c21975153/vision_nodelet_manager-2*.log`

Xulei-Zhai avatar Jun 13 '21 08:06 Xulei-Zhai

We have known issues with this version of Spinnaker, can you try one of the tested versions shown in the ReadME.

ghost avatar Jun 13 '21 14:06 ghost