Quentin Thébault

It turns out the error goes away if you try again a few times. Maybe it's a network-related error. Or maybe you're trying to push too fast after committing and...

It seems `/lib/firmware/ath11k/WCN6855/hw2.1/` directory is missing from the Alpine appliance image.

Thank you. Now it does not crash but it seems the driver is waiting for something that never happens: ```[ 0.603027] ath11k_pci 0000:00:06.0: BAR 0 [mem 0x800000000-0x8001fffff 64bit]: assigned [...

Thanks a lot for the research! Of course I would be glad to help with the testing. Can you apply the patch to the branch?

Well that's sad. Please let me know if you think of anything else or if there is some more data I could give to help solve this. For the record...

Have you tried with the latest alpine image? I saw it was updated a couple weeks ago.

Same here: ``` Capabilities: [50] MSI: Enable- Count=1/32 Maskable+ 64bit- Address: 00000000 Data: 0000 Masking: 00000000 Pending: 00000000 ``` [qualcomm_lspci.txt](https://github.com/user-attachments/files/19681428/qualcomm_lspci.txt)

Thank you guys for the interest in this issue. I checked the webcam with `v4l2-ctl` and unfortunately higher resolutions are only supported in MJPEG. ``` ioctl: VIDIOC_ENUM_FMT Type: Video Capture...

Would it be possible to disable any encoding and just forward the stream as we get it from the camera? I had a sound quality issue with the microphone and...

> It works, but the problem is that for MJPEG and 1080p resolution it will generate ~50-60 Mbps uplink traffic, which may not be practical for your use case. That's...