Zhiwen Zhou

https://drive.google.com/drive/folders/1eG66rmCCOMrQVYaU8FvtJOEsnEEaxYVc?usp=sharing These are all the files I have regarding MYNT-S cameras, hope it helps. PS: Firmwares are in MYNTEYE_BOX.zip.

https://drive.google.com/drive/folders/1eG66rmCCOMrQVYaU8FvtJOEsnEEaxYVc?usp=sharing These are all the files I have regarding MYNT-S cameras.

> > https://drive.google.com/drive/folders/1eG66rmCCOMrQVYaU8FvtJOEsnEEaxYVc?usp=sharing > > > > These are all the files I have regarding MYNT-S cameras. > > Do you have firmware of MYNTEYE_S_2.0.0_rc.img? You can check the google...

> 6.1 内核么？ 是的

package/wwan/driver/quectel_cm_5G/Makefile里的[路径](https://github.com/coolsnowwolf/lede/blob/1daa71c00586ce156ac420b8d06a3d9081f51b7c/package/wwan/driver/quectel_cm_5G/Makefile#L22)还有问题。

> > > 6.1 内核么？ > > > > > > 是的 > > 我很奇怪我的6.1内核就是无法引导，换成5.15.91，同样的配置编译出来的固件就能引导 我6.1内核引导正常啊。你是不是编译时加了啥驱动?

> > > > > 6.1 内核么？ > > > > > > > > > > > > 是的 > > > > > > > > > 我很奇怪我的6.1内核就是无法引导，换成5.15.91，同样的配置编译出来的固件就能引导...

请问你的USB有供电吗？

> > 请问你的USB有供电吗？ > > 我也不确定，但我怀疑没有供电，在你提的issue#10859找不到wwan设备我这里也是的 OK

> > hi，the code have a issue. > > ` FAST_TASK(run_rate_controller), > > #if AC_CUSTOMCONTROL_MULTI_ENABLED == ENABLED > > FAST_TASK(run_custom_controller), > > #endif` > > when run run_custom_controller ,the run_rate_controller...