Zhao Lei comments

Results 5 comments of


                                            Zhao Lei

如何获得对应的汉字分词数组？

我编译的时候发现本工程用的是nodejieba，这个结巴就是分词的。虽然我没法用，但是对你肯定有帮助。你直接用结巴就行。

MSP430_OP_RLAM gives bad MSP430_SR_Z bit

dev->regs[MSP430_REG_SR] MSP430_SR_Z is cleared already. :-)

<reg[3] for special meaning.> <I new a project using IAR, and debug it with the IAR simulator. I modified the instruction byte code, and get strange assembles that are not documented. I draw a conclusion in my opinion, for the following instructions: [0 0 0 0 src 1 1 0 0 dst — MOVA Rsrc,Rdst], [0 0 0 0 src 1 1 0 1 dst — CMPA Rsrc,Rdst], [0 0 0 0 src 1 1 1 0 dst — ADDA Rsrc,Rdst], [0 0 0 0 src 1 1 1 1 dst — SUBA Rsrc,Rdst], when src is reg[3], it has special meanings. According to the oper, the Rsrc is MOVA: 0. CMPA: 0. ADDA: 2. SUBA: 2.>

reg[3] for special meaning. not documented. But I tested. It works fine.

<reg[3] for special meaning.> <I new a project using IAR, and debug it with the IAR simulator. I modified the instruction byte code, and get strange assembles that are not documented. I draw a conclusion in my opinion, for the following instructions: [0 0 0 0 src 1 1 0 0 dst — MOVA Rsrc,Rdst], [0 0 0 0 src 1 1 0 1 dst — CMPA Rsrc,Rdst], [0 0 0 0 src 1 1 1 0 dst — ADDA Rsrc,Rdst], [0 0 0 0 src 1 1 1 1 dst — SUBA Rsrc,Rdst], when src is reg[3], it has special meanings. According to the oper, the Rsrc is MOVA: 0. CMPA: 0. ADDA: 2. SUBA: 2.>

> Hi Zhao, > > Sorry, I didn't get a notification when you'd changed the message, so I didn't notice that you'd done it! > > The explanation is good,...

<reg[3] for special meaning.> <I new a project using IAR, and debug it with the IAR simulator. I modified the instruction byte code, and get strange assembles that are not documented. I draw a conclusion in my opinion, for the following instructions: [0 0 0 0 src 1 1 0 0 dst — MOVA Rsrc,Rdst], [0 0 0 0 src 1 1 0 1 dst — CMPA Rsrc,Rdst], [0 0 0 0 src 1 1 1 0 dst — ADDA Rsrc,Rdst], [0 0 0 0 src 1 1 1 1 dst — SUBA Rsrc,Rdst], when src is reg[3], it has special meanings. According to the oper, the Rsrc is MOVA: 0. CMPA: 0. ADDA: 2. SUBA: 2.>

[Iar_controller_to_debug_msp430_simulator.zip](https://github.com/dlbeer/mspdebug/files/7025914/Iar_controller_to_debug_msp430_simulator.zip) To debug a simulator, I think automation is important. Here is Visual C++ code to control Iar. Comparing Iar simulator and dlbeer mspdebug simulator step by step, every asm...