zh522130
zh522130
**Is your feature request related to a problem? Please describe.** Using the CMSIS-DAP V2 to download a program of the same size, Keil has a faster download speed. Keil takes...
**Is your feature request related to a problem? Please describe.** I used the STM32H743VGT6 and tested the download speeds of probe-rs, Keil, and OpenOCD with the same firmware. The test...
My test environment includes two computers, C1 and C2, both equipped with dynamic public IP addresses, situated behind a home router that has UPNP enabled. Additionally, there are two mobile...
I can find `/usr/lib/libhidapi-hidraw.so.0` using `find / -name libhidapi-hidraw.so.0` ```sh # find / -name libhidapi-hidraw.so.0 /usr/lib/libhidapi-hidraw.so.0 ``` but running box64 results in the error `Error loading needed lib libhidapi-hidraw.so.0`.
I have two networks, one called `Company` and the other `Personal`. If the `server runs on the Company network` and the client requests a connection from the Personal network, the...
### Testing environment: iroh-net version: v0.27.0 server (Linux, Windows), client (Windows). client is a laptop that supports both Wi-Fi and Ethernet connections. ### Result 1. When the client program starts,...
## Environment: - Operating System: macOS - Architecture: `x64_64` - Rust Version: 1.82.0 (This probably doesn't matter, as the issue existed before the upgrade) ## How to reproduce? Use `.discovery_n0()`...
My client should not be connected by other nodes, so it will not publish any information or add a relay address. The relay address and configuration on the server side...
I found that `netwatch` only accepts `link-local` addresses when no available IPv4 or IPv6 addresses are present. In my test environment, there are two devices, `A` and `B`, connected directly...
My testing environment is as follows: Device `A` turns on a Wi-Fi hotspot (Device `A` cannot access the internet) and runs an iroh program with mDNS discovery enabled. Device `B`...