zerocritical

Hi, I have the same issue of motion sensors being unavailable. Using the URL, the state changes from 0 to 1 when motion is detected. http://your_camera_ip/cgi-bin/api.cgi?cmd=GetMdState&rs=&user=admin&password=blablah Here is my log...

I get webhook error too in my logs with the integration. I have checked i use internal IP URL with http:// and disabled https:// Anything else i should be trying?...

Hi, Just got my hands on one of these sirens. It gets added to HA , battery, Charging status and Tamper Detection shows correctly but it doesnt trigger the alarm...

My guess is, to turn on, tone should be set to one of these - sound (for sound only), light (For light only) or sound+light (for both sound and light)...

Yes, can trigger siren from the app. Here are the screenshots from the app: when triggered:  when disabled: 

The selling point of this siren is that it can be triggered using an event from another Tuya device.. like a door contact sensor or camera. So it allows to...

Brilliant! It works!! I was trying to trigger from services before but without specifying the tone! with tone, it works perfectly to trigger and disable. :)

By any chance would you be able to add configuration parameters to edit volume and duration? Like this: