David Gouveia comments

Results 6 comments of


                                            David Gouveia

Ozone StrikeBattle Support

Hi, I'm sorry for hijacking the thread, but I'm having the same problem. I've followed the instructions but it didn't work. The idVendor and idProduct are the same, but bcdDevice...

Ozone StrikeBattle Support

That was probably the case. Anyway, I did it the hard (and lazy) way, and I just manually copied all the IOKit header files that were required to the root...

Ubertooth One not booting into DFU mode and not showing any packets during capture

@ukoda can you share the pinout of the serial port? I can't find it anywhere and the PCB doesn't have labels.

Ubertooth One not booting into DFU mode and not showing any packets during capture

Thanks for the details @ukoda I'm not sure what the ISP pin is, but I assumed it would be VCC. Maybe I'm wrong? This is how I connected ubertooth to...

Ubertooth One not booting into DFU mode and not showing any packets during capture

Again, thanks for the details @ukoda . I was able to flash the bootloader and then use DFU to flash the firmware. It is still not working correctly as I...

Ubertooth One not booting into DFU mode and not showing any packets during capture

Hello @ukoda, so I tried a raspberry pi and I got the exact same results. Any command that uses the radios simply hangs. At this point, I'm not sure if...