Oleksii Zagorskyi

> Hi! > I came across the same problem and found this solution: > > ``` > ser = serial.serial_for_url(port, 115200, rtscts = False, dsrdtr = False, do_not_open=True) > ser.dtr...

I have the same issue. The reboot loop is 3.7 seconds long. Have you found any solution?

Yesterday later I found that there is a menu "Debug log" where you can turn off logging to uart0 and it resolved the issue. See 

I'm back to this, trying again (do I really need this? ...). I did reset fingerprint from Bios and now the option disappeared, so I assume I really did reset...

@uunicorn a year ago you suggested me to use `factory-reset.py` to do a factory reset. But how it can be used for not yet supported chips? As I see in...

Ok, I have an update here... I've passed the validity sensor to Win7 VM running on virtualbox, installed drivers pack Driver 5.2.5019.26 Rev.A and was able to configure it there....

> Please. upload them. I'll have a look. With which command ( nop | identify | enroll ) I should try run it multiple times? For which of the commands...

I ran "./run.sh enroll" 10 times, all repeats generated log files size is almost identical (+- up to 5 bytes). Here is last (10th run) one [1651696432.zip](https://github.com/uunicorn/python-validity/files/8627027/1651696432.zip)

Interesting detail about initial device self-disconnections. I recall when I "attached" the 138a:0092 USB device to virtualbox with Win7 and installed driver - something happened and it became unattached from...

> Looks like it can't find the firmware. Can you confirm you've got the `.xpfwext` file in the right place? Of course, here is content of folder: ``` -rw-rw-rw- 1...