yys-abu

> Hi, thanks for your answer. Actually, I did not retrain the network. I just ran with my own dataset. If you’re referring to the time it takes to start...

我改小了学习率，加入了梯度裁剪也没有作用

> Thank you for your interest. I noticed that you would like to install both `glia` and `glia-trt` in your Windows machine. But now, the libs glia and glia-trt have...

> OK. You can try to install a revised `open3d`, which can be found in [open3d](http://69.235.177.182:10801/simple/open3d/). The recommended version is 0.17.0 I tried following your suggestion, but for some reason...

> > OK. You can try to install a revised `open3d`, which can be found in [open3d](http://69.235.177.182:10801/simple/open3d/). The recommended version is 0.17.0 > > I tried following your suggestion, but...

> > > OK. You can try to install a revised `open3d`, which can be found in [open3d](http://69.235.177.182:10801/simple/open3d/). The recommended version is 0.17.0 > > > > > > I...

> You may also try the glib-0.4.4 and open3d-0.18.0. Before that, make sure you have installed libs needed by open3d. Otherwise, if you still cannot install glib successfully, I suggest...

> I guess you should have to transfer into the real Ubuntu system. Since I also did not successfully prepare envs well in my WSL + Windows, although my DexForce...

My cuda version is 11.8 and already have installed the packages in requirement.txt. But I have a new question: -- Configuring incomplete, errors occurred! Obtaining file:///home/abu2/FoundationPose-main/bundlesdf/mycuda Preparing metadata (setup.py) ......

> > Could you please release the requirements.txt for the project? > > Most required libs for training and testing BiDP can be found in [here](https://github.com/hnuzhy/YOTO/tree/main/BiDP#training). For libs `glia` and...