yuval5295

Hey Jake! I have never succeeded to program the board. I just started to try run the first example and it’s keep fail flashing. בתאריך יום ב׳, 29 באפר׳ 2024...

Yes I have and I put the jumper on 1.8V option. בתאריך יום ב׳, 29 באפר׳ 2024 ב-19:42 מאת Jake Carter < ***@***.***>: > Do you have a jumper installed...

Hey! Thank you for your reply. I send the command through terminal: [image: image.png] On Mon, 29 Apr 2024 at 22:39, Jake Carter ***@***.***> wrote: > We re-tested with a...

Sure, here it is. [image: image.png] On Sat, 4 May 2024 at 03:47, Jake Carter ***@***.***> wrote: > @yuval5295 looks like the image didn't > make it to the ticket...

cfg -c "init;reset halt" -d3 Open On-Chip Debugger (Analog Devices 0.12.0-1.0.0-7) OpenOCD 0.12.0 (2023-09-27-07:53) Licensed under GNU GPL v2 Report bugs to ***@***.***> User : 3 3 options.c:52 configuration_output_handler(): debug_level:...

Hellp Jack! it seems nothing printed on the command line after I sent this command but it makes D1 blink green light fast (which not before I send it). What...

Hello Jake! Great news, you are totally right. the problem was the MAXIM_PATH I set, by accident I put two // instead of one! Thank you so much for your...