尤晓杰
you can try different the baud rate, may be the boot loader is custom.my 19200 is a nonstandard bootloader viariant. you can try 115200 78600 etc
it seem that the 16Mhz version is the outdated 328d, equally to mega 168 though marked with "328", only with 16Mhz, 32Mhz does not work. the new 328e, is 32Mhz...
from here: https://item.taobao.com/item.htm?spm=a1z09.2.0.0.1c932e8dKugRs3&id=575845863557&_u=igtqrcba22
> > My idea is to delete LGT8F88x support from the Menu, because of many conflict with new interrupts feature. > > Agree. > Also, there is no LGT8F88x available...
> Have anyone tested D variant already? > I tried to run Blink.ino, something strange... the code turns LED on and off with each 1000ms delay, but it looks about...
> I found an article which tells how to modify the Arduino bootloader of LGT8F328P to support a baud rate of 115200bps and adjusting the system clock frequency to decrease...
MD328d is the same as lgt8f328d, md3248p = 48pin lgt8f328p from lgt official web shop.
I mean A has 192.168.1.5 at home behind firewall and B has 172.16.1.3 in office behind firewall, both firewall are not configurable by me. If without a C with public...
for eample, node a and b behind nat, if I have a third node c with public ip and port, and can I use this for a relay,just transfer for...