Ye Yang
Ye Yang
Hi, following is the LXD generated `qemu.conf` file: ``` # Machine [machine] graphics = "off" type = "q35" accel = "kvm" usb = "off" [global] driver = "ICH9-LPC" property =...
For some extra information, I downloaded WSL on the Windows Server VM to compare some simple `dd` performance values. The following commands were executed to test read and write performance:...
@vrozenfe It seems I need prior authorization to access the utility: 
 This seems to be the only output from the utility.
Thanks for the information, I'll look into it and report back with any new findings.
After finding out how to pass the QEMU configuration options via LXD, I executed the less performant tests again with the following `hv_*` parameters: `hv_time` and `hv_passthrough` The executable output...
@vrozenfe I installed `fio` on both the Linux and Windows VM and ran some performance tests. These tests were indeed quite close when it comes to storage performance. It seems...
HI @peixiu , thanks for updating with test results! As I run qemu through LXD I am not very familiar with it. If you could provide some instructions to check...
Regarding the disk limit for the container, thank you.
Does your default profile have a disk device in it?