KiKit

KiKit copied to clipboard

### Prerequisites - [X] I have read the documentation and the proposed feature is not implemented. ### Description Each component in `.kicad_sch` has a property `in_bom` `yes/no`. The corresponding GUI...

sol

### Prerequisites - [X] I have read [FAQ](https://github.com/yaqwsx/KiKit/blob/master/doc/faq.md) - [X] I use the KiKit at least 1.0.4 (older version are not supported) ### KiKit version no yet installed :( ###...

Oliverhorn

Multi line text collapsed to one line

1

### Prerequisites - [X] I have read [FAQ](https://github.com/yaqwsx/KiKit/blob/master/doc/faq.md) - [X] I use the KiKit at least 1.0.4 (older version are not supported) ### KiKit version 1.0.5 ### KiCAD version 6.0.5-0...

ebuswell

fixed pipe problem so MacOS install works now per issue 363 I have verified this works but still requires sudo permission, I was not able to make it work without....

VIPQualityPost

JLC reports an error when uploading a BOM with a long line like this: ```CSV Comment,Designator,Footprint,LCSC 1nF,"R201,R202,R203,R204,R301,R302,R303,R304,R401,R402,R403,R404,R501,R502,R503,R504,R601,R602,R603,R604,R701,R702,R703,R704,R801,R802,R803,R804,R901,R902,R903,R904,R1001,R1002,R1003,R1004,R1101,R1102,R1103,R1104,R1201,R1202,R1203,R1204,R1301,R1302,R1303,R1304,R1401,R1402,R1403,R1404,R1501,R1502,R1503,R1504,R1601,R1602,R1603,R1604,R1701,R1702,R1703,R1704,R1801,R1802,R1803,R1804,R1901,R1902,R1903,R1904,R2001,R2002,R2003,R2004,R2101,R2102,R2103,R2104,R2201,R2202,R2203,R2204,R2301,R2302,R2303,R2304,R2401,R2402,R2403,R2404,R2501,R2502,R2503,R2504,R2601,R2602,R2603,R2604,R2701,R2702,R2703,R2704,R2801,R2802,R2803,R2804,R2901,R2902,R2903,R2904,R3001,R3002,R3003,R3004,R3101,R3102,R3103,R3104,R3201,R3202,R3203,R3204,R3301,R3302,R3303,R3304,R3401,R3402,R3403,R3404,R3501,R3502,R3503,R3504,R3601,R3602,R3603,R3604,R3701,R3702,R3703,R3704,R3801,R3802,R3803,R3804,R3901,R3902,R3903,R3904,R4001,R4002,R4003,R4004,R4101,R4102,R4103,R4104,R4201,R4202,R4203,R4204,R4301,R4302,R4303,R4304,R4401,R4402,R4403,R4404,R4501,R4502,R4503,R4504,R4601,R4602,R4603,R4604,R4701,R4702,R4703,R4704,R4801,R4802,R4803,R4804,R4901,R4902,R4903,R4904,R5001,R5002,R5003,R5004,R5101,R5102,R5103,R5104,R5201,R5202,R5203,R5204,R5301,R5302,R5303,R5304,R5401,R5402,R5403,R5404,R5501,R5502,R5503,R5504,R5601,R5602,R5603,R5604,R5701,R5702,R5703,R5704,R5801,R5802,R5803,R5804,R5901,R5902,R5903,R5904,R6001,R6002,R6003,R6004,R6101,R6102,R6103,R6104,R6201,R6202,R6203,R6204,R6301,R6302,R6303,R6304,R6401,R6402,R6403,R6404,R6501,R6502,R6503,R6504,R6601,R6602,R6603,R6604,R6701,R6702,R6703,R6704,R6801,R6802,R6803,R6804,R6901,R6902,R6903,R6904,R7001,R7002,R7003,R7004,R7101,R7102,R7103,R7104,R7201,R7202,R7203,R7204,R7301,R7302,R7303,R7304,R7401,R7402,R7403,R7404,R7501,R7502,R7503,R7504,R7601,R7602,R7603,R7604,R7701,R7702,R7703,R7704,R7801,R7802,R7803,R7804,R7901,R7902,R7903,R7904,R8001,R8002,R8003,R8004,R8101,R8102,R8103,R8104,R8201,R8202,R8203,R8204,R8301,R8302,R8303,R8304,R8401,R8402,R8403,R8404,R8501,R8502,R8503,R8504,R8601,R8602,R8603,R8604,R9101,R9102,R9103,R9104,R9201,R9202,R9203,R9204",keyboard:C_0805_2012Metric_S,C46653 ``` This can be fixed by breaking the line every ~500th character or...

jrhrsmit

Update export.py to support 6.99

1

These changes fix the workflow for fabrication output generation in 6.99. **Version** ` Application: KiCad Version: (6.99.0-2103-gdc6c27b686), release build Platform: macOS Version 12.4 (Build 21F79), 64 bit, Little endian, wxMac...

tjlusco

KiKit panel does not inherit design rules.

13

Noticed that the panel generated by KiKit does not inherit the design rules from the design being panelized. This makes it so you cannot run a successful DRC on the...

mayl

macOS install instructions not working

6

### Prerequisites - [X] I have read [FAQ](https://github.com/yaqwsx/KiKit/blob/master/doc/faq.md) - [X] I use the KiKit at least 1.0.4 (older version are not supported) ### KiKit version kikit: command not found (trying...

elmegil

CLI comands in Windows, ' instead of "

3

### Prerequisites - [X] I have read [FAQ](https://github.com/yaqwsx/KiKit/blob/master/doc/faq.md) - [X] I use the KiKit at least 1.0.4 (older version are not supported) ### KiKit version 1.0.5 ### KiCAD version 6.0.4...

androot2

create stencil for adhesive layers

1

- added --type option for adhesive, defaults to solderpaste - changed zipping gerbers from subprocess.check_call("zip") to shutil.make_archive() - fixed --cutout (layer names did not match)

wannessels