xsp1989

@darkxst @Koenkk Hello, thank you for your contribution to the open source community. Do you have more questions about the ZB-GW04 product? If there are still misunderstandings, you can raise...

The user has not provided more information, so I cannot offer further explanations for this phenomenon. The following possibilities have not been completely ruled out: 1. Issues with the CH340E...

I checked all the z2m questions about zb-gw04, and I didn't find any specific questions about ZB-GW04. Then I searched all the questions about zb-gw04 crc error through google, and...

@MPParsley Hello, I searched for information on the Internet. At present, this problem does not occur only in ZB-GW04. Therefore, it cannot be said that this is definitely a problem...

> I bought a cheap ZB-GW04 but there's no way I could get it to run stable. > > There's no way to get it to run stable, tested all...

Please use the firmware from this repository to upgrade and test. The upgrade steps are as follows: first upgrade the firmware (v7.4.3), and if necessary, upgrade nvm3_initfile.gbl https://github.com/xsp1989/zigbeeFirmware/tree/master/firmware/Zigbee3.0_Dongle-NoSigned/EZSP

There is no plan to build 8.x firmware for the time being. Generally, new cross-version upgrades will have some major changes, and often introduce some bugs. Unless there are other...

There will be no problem upgrading directly through the tasmota upgrade page. You can try downloading the upgrade file again. Maybe an error occurred when downloading the file, causing the...

Could you please elaborate on the problem you are having? I don't know what problem you are having. Or you can ask the developers of zigbee2mqtt about the problem you...

ZB-GW03 can only use signed firmware, unless you use jlink V9 to refresh the bootloader